İç ve dış cephelerde her tip ısı yalıtım levhalarının (EPS, XPS, taşyünü, poliüretan köpük) yüzeylerinin kapatılmasında kullanılan, çimento esaslı, yüksek yapışma mukavemeti ve elastikiyet özelliğine sahip, ısı değişikliklerine, suya ve dona dayanıklı kolay uygulanabilen yüzey düzeltme sıvasıdır.
MSDS Belgemiz için lütfen TIKLAYINIZ.
TDS Belgemiz için lütfen TIKLAYINIZ.
Daha Fazla Bilgi Alın İletişime Geçinİç ve dış cephelerde her tip ısı yalıtım levhalarının (EPS, XPS, taşyünü, poliüretan köpük) yüzeylerinin kapatılmasında kullanılan, çimento esaslı, yüksek yapışma mukavemeti ve elastikiyet özelliğine sahip, ısı değişikliklerine, suya ve dona dayanıklı kolay uygulanabilen yüzey düzeltme sıvasıdır.
| Color | Grey |
| Package | 25 Kg craft bags |
| Water mixing ratio | 6 - 6,5 Lt |
| Application degree | +5C & +30C |
| Mixture self life | 3 Hour |
| Application Thickness | 2-7 mm |
| Caking period | < 20 dk |
| Consumption | 5-6 Kg/m2 |
| Opening period of traffic | 24 - 48 Hour |
| Storage | In original package 12 months maz 10 line |
| Resistance against hot | -30C + 80C |
| Sticking strenght | >0,2 N/mm2 |
Indoor and outdoor horizontal and vertical surfaces
It is used for plastering the surfaces of thermal insulation coating plates.
It is not applied on wooden, metal and PVC surfaces.
The surface should be clean and sound, if any, dust, oil, dirt or materials that prevent adhesion should be removed from the surface, mortar, paint, cement residues, etc. should be removed. items should be scraped.
6-6.5 Lt. into a clean and round shaped container. put clean water and 25 Kg. Add the powder product slowly and mix until a homogeneous appearance is formed, without leaving any lumps.
Mix with a low speed (400dv/min) electric mixer.
Let the mixture rest for 10 minutes and mix again for another 30 seconds and use
Care should be taken to ensure that the ambient and ground temperature to be applied is between +5C and +30C.
Ustun Fix is applied with a flat steel trowel on thermal insulation materials with a thickness of 2 mm.
The plaster reinforcement mesh is embedded in the mortar with the help of a steel trowel while the plaster mortar is still fresh on the surface.
At the joints of the plaster reinforcement mesh, the edges of the mesh of approximately 10 cm are overlapped.
After 3-4 hours, the second layer of surface plaster is applied. At the end of 2 coats of application, the plaster thickness should be at least 3 mm.
Decorative topcoat material should be applied after the second coat of plaster is completely dry.
Do not work in extreme windy and sunny weather in outdoor applications.
Add extra water, cement, etc. to the mix. Do not make additions.
Never apply on frozen, dusty and dirty surfaces.
